Change History

---

GPSMAP 722/742/752/922/942/952 Plus software version 28.41

as of October 2, 2024

Changes made from version 28.40 to 28.41:

• Improved robustness of Garmin Navionics+ built-in map updates.
• Other bug fixes and improvements.

Changes made from version 28.30 to 28.40:

• Fixed an issue that can cause Mercury RPM gauge limits to be incorrect in some installations.
• Other bug fixes and improvements.

Changes made from version 28.10 to 28.30:

• Fixed support for 'All' zone for Fusion stereos which allows for volume control of all zones on a stereo at once.
• Fixed issue with remote power-on button not appearing for Fusion MS-WB670 and MS-BB100 stereos after they enter power saving mode.

Changes made from version 27.10 to 28.10:

• Updated graphical look and feel of analog gauges.
• Improved access to system settings button on new home page.
• Updated graphical look and feel of the media and Fusion function pages.
• Updated SurroundView configurations, calibrations, and additional user settings.
• Added support for Mercury Helm for different stations on the boat, Mercury Steering Angle, and Mercury Troll overlay bar.
• Other improvements and bug fixes.

Changes made from version 26.20 to 27.10:

• Added support for quickly reviewing and modifying overlay toolbars.
• Added support for pan-tilt-zoom IP cameras and target tracking.
• Added support for controlling Power Pole shallow water anchors with overlay toolbar.
• Improved transfers of Android and iOS Activecaptain file transfers while app is minimized.
• Added support to display Mercury Cruise overlay bar and control where available.
• Added ability to select Heave preferred source if multiple sensors are present.
• Other improvements and bug fixes.

Changes made from version 26.10 to 26.20:

• Fixed an issue with SideVu causing units to freeze after long periods of time.
• Fixed an issue with LiveScope Color Limit when used with Blue Palette.
• Fixed an issue with depth range shading.
• Other improvements and bug fixes.

Changes made from version 25.30 to 26.10:

• Added support for new home page and graphical style. This update includes many user interface improvements and easier navigation to pinned functions.
• Added support for new Garmin Navionics+ and Garmin Navionics Vision+ cartography along with several chart presentation improvements and Auto Guidance+ technology.
• Added a Ghost Reject Auto setting to improve sonar performance and ghost image rejection for LiveScope under most conditions.
• Added LiveScope Color Limit control to reduce background noise.
• Added support to detect and display Mercury popup banners.
• Added Mercury active exhaust state and toggle options for supported engines.
• Added support for filtering sailing polar data.
• Hide course to steer during upwind routing when going upwind with laylines enabled.
• Added display of layline data fields without requiring laylines to be visible.
• Added support for vessel look-ahead on navigation, fishing, and weather charts.
• Added troubleshooting text to many warning/alarm banners.
• Added improved options for Yamaha split engine pages.
• Added support for additional Yamaha autopilot steer patterns.
• Various other Yamaha engine control improvements.
• Other improvements and bug fixes.

Changes made from version 24.10 to 25.30:

• Added Beam Overlay feature to improve Panoptix display when multiple Panoptix transducers are connected.
• Added support for sailing polar tables along with new data fields and layline integration.
• Added customizable data field filtering options.
• Added support for Estonian, Hungarian, Indonesian, Latvian, Lithuanian, Romanian, Slovakian, and Ukrainian languages.
• Improved installation and verification process for OnDeck Hub by showing detected sensors, relays, and diagnostic data.
• Corrected missing option on single range radar for hiding AIS trails.
• Fixed a rare issue where the configured engine page layout was being reset after starting the engines.
• Improved transmission of cross track error (XTE) on NMEA0183 when using a GoTo navigation.
• Other improvements and bug fixes.

Changes made from version 23.00 to 24.10:

• Added support for Mercury SmartCraft Connect gateway, including VesselView page and fault code notifications.
• Improved presentation and review of ActiveCaptain Community POIs.
• Added support for momentary switches and a configuration page using standard NMEA2000 switch PGNs.
• Added support to display up to 5 Yamaha engines.
• Fix an issue where trip data was being reset on power off.
• Improved software updates from ActiveCaptain.
• Expanded allowable values for dynamic lake level.
• Re-organized and improved presentation of SD card popup page.
• Added ability to auto align vessel icon to heading or COG based on speed.
• Fixed an issue where headling line options weren't displaying on navigation chart.
• Improved heading line display on radar pages.
• Fixed an issue where depth range shading might not work from a map card.
• Updated magnetic variance models.
• Other improvements and bug fixes.

Changes made from version 22.10 to 23.00:

• Added message banner for easier route navigation with the Force Trolling Motor.
• Added additional LiveScope color palettes.
• Added Compress Range, Reverse Range, and other LiveScope user interface improvements.
• Added support for the engine jack-plate position message for Bob's Jack Plate products connected via NMEA2000.
• Improved NMEA2000 device information page to show the device's calibration status on first page.
• Improved software updates from the ActiveCaptain app.
• Fixed transmit power slider values showing '4294' for all settings.
• Fixed text issues when using certain languages.
• Other improvements and bug fixes.

Changes made from version 21.00 to 22.10:

• Added heave PGN (127252) support on NMEA2000.
• Added water speed as a source of odometry.
• Added new fish species supported by the SiriusXM Fish Mapping service.
• Improved startup speed of file transfers from mobile phones to chartplotters.
• Fixed a rare issue that could cause marking a waypoint to fail.
• Fixed an issue with sonar pinch-to-zoom after changing frequency.
• Other improvements and bug fixes.

Changes made from version 20.10 to 21.00:

• Added new Vivid Color Schemes for ClearVu and SideVu Sonar.
• Added support for AutoGuidance path sync from ActiveCaptain.
• Added support for GLS 10 Ghost Tree Rejection.
• Fixed an issue with unexpected video stream pausing.
• Fixed an issue with Wi-Fi passwords containing spaces.
• Fixed a rare issue where the SideVu range control would adjust brightness instead.
• Other improvements and bug fixes.

Changes made from version 20.00 to 20.10:

• Fixed an issue with OneHelm touch controls.

Changes made from version 19.10 to 20.00:

• Improved autopilot remote pairing.
• Added autopilot response to power boats.
• Added autopilot response adjustment for power boats.
• Added support for duplicate names to waypoints, routes, and saved tracks.
• Added support for route turns that are not waypoints.
• Added support for Yamaha 20MY features.
• Added new sonar selection prompt for certain Garmin transducers and any transducer without an ID.
• Added support for MARPA auto tracking.
• Prioritized traditional sonar source for water depth and temperature.

Changes made from version 19.00 to 19.10:

• Fixed support for NMEA 2000 devices that could send invalid product data.

Changes made from version 18.10 to 19.00:

• Add support for Garmin lock screen.
• Waypoint VMG can be displayed while navigating using Go To.
• Added new indicators for currently active alarms.
• Add support for FLIR's MSX/CTV feature.
• Improved sonar scroll speed controls.
• Improved autopilot controls for keyed devices on autopilot page.
• Improved shuffle and repeat controls for external media devices.
• Other improvements and bug fixes.

Changes made from version 17.10 to 18.10:

• Added support for Panoptix LiveScope perspective mode.
• Added support for selecting which displays should show smart notifications.
• Added support for SeaStar Optimus.
• Added support for Garmin Force Trolling Motor arrival mode.
• Added new Garmin Force Trolling Motor warnings.
• Added support for the FLIR M300 series of digital cameras.
• Added support for engine manifold air temperature display.
• Added sonar picture advance.
• Added support for synchronizing boundary user data items across MFDs.
• Updated default overlays.
• Improved GXM 54/SXM fish mapping.
• Improved ClearVu and SideVu image quality.
• Improved sonar scroll speed controls.
• Improved Auto Guidance performance when routing to a marina.
• Fixed an issue where overlays could show invalid engine data when getting engine data from a Yamaha Gateway.
• Other improvements and bug fixes.

Changes made from version 16.10 to 17.10:

• Added support for High Resolution Relief Shading Chart type.
• Added support for NMEA2000 digital switching PGN.
• Added support for Fusion RA210.
• Added Evinrude joystick support.
• Added support for Airmar P19/P32/TM165HW & MotorGuide HD+ transducers.
• Added radar brightness to control the brightness of heading, range rings and VRM/EBL lines.
• Improved UI for future scanner features.
• Improved chart rendering performance.
• Improved security for Quatix 5 during ANT pairing.
• Improved compatibility with FLIR M324.
• Improved combo sizing to allow smaller windows for sonar functions.
• Improved display of filenames from SD cards using unicode characters.
• Improved SD card selection to make it easier to save multiple screenshots.
• Other improvements and bug fixes.