Change History

---

ECHOMAP Ultra 102sv/105sv/106sv/122sv/125sv/126sv software version 29.00

as of June 26, 2024

Changes made from version 28.00 to 29.00:

• Added support for selecting whether Power-Pole Shallow Water Anchors should stow or remain deployed when the Garmin Force trolling motor is stowed.
• Other improvements and bug fixes.

Changes made from version 27.10 to 28.00:

• Added support for new Data Fields to show battery status information including Voltage, Time Remaining, and other values.
• Added support for reading large capacity (exFAT formatted) cards up to 1TB via Built-In Card Reader.

Changes made from version 26.00 to 27.10:

• Added support for saving only the user data within a specified area boundary to a card.
• Fixed an issue that caused waypoint icons to default back to grey dot after changing the waypoint symbol in some cases.
• Fixed an issue that caused degraded Livescope resolution under certain circumstances.

Changes made from version 25.00 to 26.00:

• Added support for Power-Pole CHARGE Marine Power Management Station to allow users to monitor battery status, to emergency start, to select where power is directed when charging, and to transfer power between power banks. These features require purchase of a Power-Pole CHARGE unit and a C Monster Gateway through Power-Pole.
• Added support for calibrating Force Kraken Trolling Motor steering alignment.
• Other improvements and bug fixes.

Changes made from version 24.20 to 25.00:

• Added support for using heading direction from the Garmin Force trolling motor compass instead of the LiveScope transducer compass within LiveScope pages for barrel mount installations.
• Added support for Power-Pole Advanced Boat Control features when used with the Garmin Force trolling motor: Smart Anchor Selection, Smart Anchor Jog, Drag Detection, End of Route, and Auto Stow. These features are only compatible with dual Power-Pole setups, and require purchase of a C-monster Gateway through Power-Pole.
• Fixed an issue that could show the 'No Transducer Connected' message on power-up when connected to a GLS10.
• Fixed an issue that could cause the device to report an incorrect Unit ID to the ActiveCaptain App for registration to the user's Garmin account.
• Other improvements and bug fixes.

Changes made from version 23.10 to 24.20:

• Corrected the calculation for the bearing digital data field.
• Other improvements and bug fixes.

Changes made from version 22.10 to 23.10:

• Improvements to GN+ mapping.
• Improvements to Mercury Engine integration.
• Fixed inaccurate depth range shading in areas below sea level.
• Other improvements and bug fixes.

Changes made from version 21.00 to 22.10:

• Added a new overlay bar to display status of Mercury engines.
• Improved support for Mercury engine monitoring to include oil level.
• Fixed problem showing depth range shading on Quickdraw maps with depth under 15ft(4m).
• Fixed problem with POI maps including the Fishing Hot Spots Pro v2019.0 Chart.
• Fixed sonar issue with traditional/2D transducers.
• Fixed problem with incorrect RPM Gauge limits on Mercury engines.
• Other improvements and bug fixes.

Changes made from version 20.00 to 21.00:

• Fixed issue with SideVu causing units to freeze after long periods of time.
• Fixed issue with LiveScope Color Limit when used with Blue Palette.
• Fixed issue with Depth Range shading.

Changes made from version 19.20 to 20.00:

• Added support for controlling Power Pole shallow water anchors with overlay toolbar.
• Improved transfers of Android and iOS Activecaptain file transfers while app is minimized.
• Added support to display Mercury Cruise overlay bar and control where available.
• Other improvements and bug fixes.

Changes made from version 19.10 to 19.20:

• Fixed issue with SideVu causing units to freeze after long periods of time.
• Fixed issue with LiveScope Color Limit when used with Blue Palette.
• Fixed issue with Depth Range shading.
• Fixed issue with recalculated routes while using Autoguidance.

Changes made from version 18.20 to 19.10:

• Added support for new Garmin Navionics+ and Garmin Navionics Vision+ cartography along with several chart presentation improvements and Auto Guidance+ technology.
• Added a Ghost Reject Auto setting to improve sonar performance and ghost image rejection for LiveScope under most conditions.
• Added support to detect and display Mercury popup banners.
• Added Mercury active exhaust state and toggle options.
• Added LiveScope Color Limit control to reduce background noise.
• Other improvements and bug fixes.

Changes made from version 17.10 to 18.20:

• Added Beam Overlay feature to improve Panoptix display when multiple Panoptix transducers are connected.
• Improved transmission of cross track error (XTE) on NMEA0183 when using a GoTo navigation.
• Other improvements and bug fixes.

Changes made from version 16.10 to 17.10:

• Added Mercury engine page and alarms.
• Improved presentation and review of ActiveCaptain Community POIs.
• Added support for momentary switches and a configuration page using standard NMEA2000 switch PGNs.
• Fixed an issue where trip data was being reset on power off.
• Improved software updates from ActiveCaptain.
• Expanded allowable values for dynamic lake level.
• Added ability to auto align vessel icon to heading or COG based on speed.
• Updated magnetic variance models.
• Fixed issue with split frequence sonar gain controls.
• Other improvements and bug fixes.

Changes made from version 15.10 to 16.10:

• Added message banner for easier route navigation with the Force Trolling Motor.
• Added additional LiveScope color palettes.
• Added Compress Range, Reverse Range, and other LiveScope user interface improvements.
• Added support for Bob's Machine Shop Jackplates.
• Other improvements and bug fixes.

Changes made from version 14.10 to 15.10:

• Added heave PGN (127252) support on NMEA2000.
• Improve shallow water sonar depth tracking.

Changes made from version 13.20 to 14.10:

• Added compatibility with GT36 and GT56 Transducers.
• Added new Vivid Color Schemes for ClearVu and SideVu Sonar.
• Added sync AutoGuidance paths with ActiveCaptain.
• Added GLS 10 Ghost Tree Rejection.

Changes made from version 12.10 to 13.20:

• Improved autopilot remote pairing.
• Added autopilot response to power boats.
• Added new sonar selection prompt for certain Garmin transducers and any transducer without an ID.
• Prioritized traditional sonar source for water depth and temperature.
• Improved the detail and clarity of ClearVu and SideVu sonar images.

Changes made from version 12.00 to 12.10:

• Fixed support for NMEA 2000 devices that could send invalid product data.

Changes made from version 11.20 to 12.00:

• Improved sonar scroll speed controls.
• Added new UHD sonar simulation files for demo loops.
• Networked units share a single Wi-Fi access point for interfacing with ActiveCaptain and Wi-Fi peripherals.
• Improved shuffle and repeat controls for external media devices.
• Waypoint VMG (Velocity Made Good) can be displayed while navigating using Go To.

Changes made from version 10.00 to 11.20:

• Added new trolling motor warnings.
• Added trolling motor arrival modes.
• Improved Auto Guidance performance when routing to a marina.
• Fixed several bugs related to stability and user experience.
• Improved ClearVu and SideVu image quaility.
• Improved Honda Lean Burn experience.
• Added LiveScope Perspective mode support.

Changes made from version 9.20 to 10.00:

• Added relief shading chart.
• Added dual onscreen controls to Traditional Split Zoom sonar for range and gain control.
• Added dual onscreen controls to Panoptix™ pages for range and gain control.
• Added anchor gain and navigation gain to Trolling Motor bar.
• Added beam width coverage cone to Traditional Split Zoom sonar.
• Added Evinrude Joystick support.
• Enabled SiriusXM for RA770 Fusion Radio.
• Added Binary Status Report and Switch Bank Control to NMEA2000 switching.
• Added locales for Australia, Estonia, Slovakia, Latvia, Lithuania, and New Zealand.
• Fixed several bugs related to stability and user experience.
• Added support for ClearVu transducers.

Changes made from version 8.30 to 9.20:

• Add support for Garmin Trolling Motor.
• Add control for displaying Federal Mineral Lease Block chart layer.
• Add ability to store Hull Identification Number (HIN).
• Add sonar magnify controls.
• Made various improvements to map drawing.
• Fix issue where a unit would power on randomly when connected to another unit. Power modes now sync between units.
• Fix issue where depth range shading did not conform to contour lines.