Added support to update Autopilot Remote Control via MFD.
Added a magnify zoom feature to Traditional, ClearVu and SideVu.
Added fish icons to the traditional sonar view.
Added support to control the new Garmin Force Trolling Motor from the MFD.
Added support to toggle Federal Mineral Lease Blocks.
Added GXM 54 fishing features.
Added support for Airmar P19/P32 transducers.
Added partial support for Garmin GT54UHD transducers, with 1 MHz SideVu disabled.
Fixed an issue where a chartplotter can reboot with a networked fusion head unit.
Fixed an issue where Canadian weather could show U.S data.
Enhanced support for SeaStar Maximus DCM.
Other improvements and bug fixes.
Changes made from version 15.00 to 15.10:
Add support for Yamaha NMEA 2000 Gateway.
Fixed an issue where the autopilot bar could lose highlight when using a GRID.
Fixed an issue where units would reboot on startup if a large GPS Speed Filter was set.
Other improvements and bug fixes.
Changes made from version 14.30 to 15.00:
Added support for Raster Charts through ActiveCaptain download.
Added support for High Resolution Relief Shading maps layer on Fishing Chart with supplemental map card.
Improved boot startup times!
VIRB 360 Camera enhancements for direct pairing without the need for app.
Added support for FUSION-Link 2.0 Ethernet control for compatible Fusion radios including SRX400 and RA770.
Added support for displaying Real and Virtual AIS Aids-to-Navigation (AtoNs).
Improved pairing security with inReach secure key exchange. Requires new inReach software.
Added support for Airmar P75M/P95M transducers.
Added workaround for FLIR M324 bug to allow control from the MFD.
Improved GPS auto preferred sourcing to find GPS17x/GPS19x.
Remember map zoom and panning states when returning to charts.
Added support for displaying up to 6 engines.
Fixed a rare issue where the depth number wouldn't show until viewing a sonar page.
Other improvements and bug fixes.
Changes made from version 14.20 to 14.30:
Fixed an issue where the unit could fail to detect Airmar transducers.
Changes made from version 14.10 to 14.20:
General improvements and bug fixes.
Changes made from version 12.10 to 14.10:
Added new graphical look.
Added support for Evinrude engines.
Added support for pinch to zoom on Panoptix.
Added support for GRID 20.
Added support for GC 200.
Added the ability to control the size of chart fonts and symbols.
Updated the sonar scroll speed interface by adding more speed settings.
Added support for US Coast Guard search patterns.
Added the ability to choose between multiple background options.
Added support for sending engine data to Quatix 5's BoatData app.
Added the ability to select the preferred media device from the main media page.
Added the ability to use Dual Range radar in combos.
Added support for inReach Mini.
Added support for Garmin Marine AP Remote.
Added support for Standard Mapping.
Increased the number of supported MARPA targets.
Increased the maximum boundary radius.
Improved streaming of IP video cameras.
Improved NMEA 2000 bandwidth usage.
Improved handling of multiple sources of rudder angle.
Fixed an issue where engine data might not be displayed.
Fixed an issue where Engine Load data could disappear.
Fixed an issue where a GRID 10 could skip over items.
Fixed an issue when reviewing information about a lake.
Fixed an issue where a thruster warning banner would pop up.
Fixed an issue when using an AIRMAR DX900.
Fixed a rare crash when reading from an SD card.
Other improvements and bug fixes.
Changes made from version 12.00 to 12.10:
Fixed issue with XID detection for certain Airmar transducers.
Various video bug fixes and improvements.
Changes made from version 11.20 to 12.00:
Added support for Panoptix LiveScope.
Added support for viewing ActiveCaptain Community information.
Added full 360-degree panning of VIRB 360 video on the chartplotter.
Added support for GC100.
Added support for Fusion RA770 including the Partybus feature.
Added the ability to link Fusion stereos and GXM antennas for easier tuning and volume control.
Added the Panoptix PS22 Auto Mode Detection.
Added a dedicated Loran TD data field.
Added the ability to view Leeway data received via NMEA 2000.
Added the ability to view restricted areas and Marine Protected Areas via Chart Layers feature.
Added the ability to display Navaid labels using a short or full name.
Added the ability to create a waypoint using range & bearing.
Added MotionScope on-screen control.
Added the ability to view previously received Smart Notifications.
Fixed intermittent issues with 2 Panoptix transducers on the network.
Fixed rare crash when viewing map locations.
Added support for additional AIS targets.
Improved Quickdraw Contours to collect depth more reliably when multiple transducers are present but not all are tracking bottom.
Fixed issue with auto power setting.
Changes made from version 11.00 to 11.20:
Fixed a rare issue on unit recovery that could delete settings and data (introduced in 10.00).
Fixed a rare issue on power up with multiple MFDs and the GRID10.
Changes made from version 10.00 to 11.00:
Added support for NMEA2000 standard alerts.
Added support for displaying Seakeeper alarms.
Added more precise controls for displaying MARPA alarms.
Improved sonar ping rate.
Improved visibility of rocks and pilings when symbol size is set to Smallest.
Fixed an issue with the display being too dim during power up.
Fixed an intermittent issue with units failing to boot with an SD card inserted.
Fixed an issue with the auto power on setting not saving when power is disconnected.
Changes made from version 8.80 to 10.00:
Added Support for New Garmin Active Captain Companion App:
OneChart lets you access all your charts and maps from your mobile device.
Get Smart Notifications such as calls and texts on your Chartplotter display when paired with the app.
Make, save and transfer routes and waypoints between the app and Chartplotter.
Easily upload your Quickdraw Contours surveys to the Quickdraw Community.
Download Quickdraw Community Contours for installation on your Chartplotter.
View and control your Chartplotter from your smartphone or tablet using the Helm feature.
Download new software for installation on your Garmin Chartplotters to keep your marine electronics up-to-date.
Added new layer controls to the chart to allow the user to more easily configure the chart display.
Added new on screen controls to allow for easy access of navigation and radar features.
UI improvements to maximize visibility of the Chart and Radar.
Improvements to power off and sleep menus.
Improvements to stop sonar transmitting when sleeping the MFD.
Added support for PS22-TR auto orientation.
Added localization and simplified the startup wizard.
Added grid view for selecting waypoint symbols.
Added support for FLIR M-Series Next Generation.
Initial support for FLIR digital cameras (M100, M200, M400).
Added NMEA 2000 support for compatible stereos by Clarion.
Added Smart Boundaries feature.
NMEA 2000 Specification update.
Fixed an issue with Quickdraw community: iOS install failure.
Fixed an issue receiving no data from speed wheels.
Fixed an issue with 3rd Party GPS antenna.
Fixed an issue where Quickdraw starter map shows water areas with earth (yellow) color.
Fixed an issue where VHF is showing targets in list but not on chart pages.
Fixed an issue where the user is unable to acknowledge alarm when touchscreen dimmed to 0%.
Fixed an issue where 'Stop Navigation' is not always clearing route from all MFDs.
Other improvements and bug fixes.
Changes made from version 8.70 to 8.80:
Changes to support manufacturing.
Changes made from version 8.60 to 8.70:
Added support for 2017 built-in US mapping. LakeVu and g2 content are combined into a single map; the Built-in Map button is no longer visible. For 2017 LakeVu mapping, use the Fishing Chart to view fishing contours and the Navigation chart to navigate.
Added support for depth range shading with BlueChart® g2 HD and BlueChart® g2 Vision® HD.
Improved presentation of Fishing Hot Spots® data.
Added support for Heel, Pitch and Rate of Turn data fields.
Added support for 9-axis Heading Sensor calibration.
Added support for SteadyCast Heading Sensor calibration.
Added support for Radar Target Size.
Added support for Panoptix FrontVu Bow offset and Forward depth alarm.
Corrected support for registering a vessel in Express.
Added menu option for showing Navigation Labels.
Corrected visibility of Audio tuning controls.
Improved stability with VIRB action camera.
Improved text and translations.
Corrected Quickdraw Contours issues.
Improved NMEA 2000 stability with high network traffic.
Updated magnetic variation table.
Improved Canada forecasts.
Improved navigation state synchronization.
Added engine gauge data to system profiles.
Corrected Anchor drag alarm units.
Improved chart drawing performance.
Fixed an issue drawing certain characters in the Greek language.