Updates & Downloads

BaseCamp Legacy software version 4.2.5

as of December 12, 2013

Download (55.88 MB)

View installation instructions

Notes:

Windows XP Service Pack 3 or later is required.
.NET framework 3.5 SP1 is required. A current version of .NET will be installed if needed.
Windows Media Player 11 or greater is required (a free download from Microsoft).
1 GB of system memory is required, 2 GB of system memory is recommended when using BirdsEye Imagery or Garmin Custom Maps.
A video card that supports OpenGL version 1.3 or later is needed to enable the 3D view.
If you experience problems when interacting with the map views, please make sure that you have installed current video card drivers.
BaseCamp will recognize all MapSource products except BlueChart.
BaseCamp does not work with serial GPS devices.

Change History

Changes made from version 4.2.4 to 4.2.5:

Fixed strings being displayed in multiple languages in the UI
Fixed long delay when changing the activity profile of a route on the route dialog
Fixed long delay when converting a track into a route
Fixed issue where changing the activity profile of an individual route leg wasn't applied unless one of the via times was also changed
Fixed issue clicking Next on the geotagged photo properties dialog when there is only one photo in the list
Fixed long delays when selecting many points in the track point list
Fixed long delays when pasting many points in the track point list
Improved robustness of auto-saving user data

Changes made from version 4.2.3 to 4.2.4:

Fixed error when deleting the last track point in a track
Fixed 'Arrive Continue' guidance issue on zumo 660
Fixed address search issue when running in languages other than English
Fixed user data from FIT files not being read from the Edge 800
Fixed error when removing user data from a list or list folder
Fixed error when using Trip Planner
Fixed error when selecting a track to create an Adventure from.

Changes made from version 4.2.2 to 4.2.3:

Fixed imported files not creating lists in the proper place
Added ability to remove and delete user data when a list folder is selected
Added keyboard arrow key handlers to the geotagged photo properties dialog
Added support for joining tracks when the track point timestamps don't line up
Added support for a transparent color in Custom POI files
Added export of waypoints, routes, and tracks to KML
Added reading of fitness courses from Edge devices, these are converted to tracks
Improved quick search responsiveness, speed of searches, and usability
Improved Trip Planner UI display refresh and sizing behavior
Change so that 'Install Maps' and 'Check for device software updates' menu items are always visible and enabled
Change to recalculate the route if needed when the route properties dialog is hidden, not just when selection changes
Change so that list folders aren't required to have unique names in the same parent folder
Fixed issue with junction view information in routes not being calculated correctly, may not work on certain older devices
Fixed issue with track stats not updating after editing the track
Fixed various issues with Trip Planner
Fixed issue with reading some map files from newer PND devices
Fixed issue with some drag/drop operations
Fixed rounding of dimensions in truck and RV routing options
Fixed issue with displaying many error dialogs if a device is unplugged during a transfer
Fixed drag/drop of an Adventure from find results into Trip Planner
Fixed issue when creating a route from a Yelp find result that failed to geocode
Fixed issue with fitness data not being preserved when sharing data with Garmin cloud storage

Changes made from version 4.2.1 to 4.2.2:

Fixed start-up issue when opening some map installations
Fixed start-up issue with opening Trip Planner
Fixed various issues with upgrading legacy databases
Fixed issue searching for named trails
Fixed activity based routing
Fixed issue with editing routes received from a device
Fixed issue when using find

Changes made from version 4.1.2 to 4.2.1:

Added Trip Planner
Adds an easy way to plan multi-day trips
Round trip support
Can print a trip itinerary
Can add destinations along a route
Flying support (airport and flight number look-up)
Supports traveling between different time zones
Can add Adventures that you'd like to take as part of your trip
Routing Improvements
Added support for different route profiles for different legs of a route
Added RV and Truck routing profiles with special route options
Find Improvements
Added support for UK postal code search
Added support for Yelp search
Added support for named POI search (far away POIs should be found if it's an exact name match)
Added support for POI category search (you can type 'Hotels, Las Vegas, NV')
Added quick search (hover over the map to invoke it)
Added ability to display more search results
Fixed various find issues
Basestation Improvements
Added support for displaying BirdsEye while in Basestation mode
Added support for displaying and saving the track of the Basestation itself
Added support for displaying the most recent update time for Basestation contacts
Added support to have different folders and lists with the same name (as long as they have a different parent in the folder hierarchy)
Added support for changing the location of BaseCamp's database
Added Irish Transverse Mercator grid
Fixed an issue where roads from the base map were displaying along with roads from the detailed map
Fixed an issue where BaseCamp was not displaying properly localized map labels
Fixed issue with Garmap Southern Africa Topo & Rec 2012.3 NT not being displayed in BaseCamp
Fixed an issue with certain file names for Adventures and Garmin Cloud

Changes made from version 4.1.1 to 4.1.2:

Fixed an issue with Basestation mode.
Fixed an issue where BaseCamp would not remember the positioning of the toolbars correctly.
Fixed an issue where the Custom POI symbols from POI files where incorrect.
Fixed an issue with the address search.
Fixed an issue where refreshing a search was using the last location on the map, not the current one.
Fixed an issue where Cutting (Ctrl-X) a photo on a device would delete the photo and prevent the user from pasting it.
Fixed an issue with some Asian language map products.
Fixed an issue with deleting track points.
Fixed an issue with route creation in a folder.
Fixed an issue where the hand tool was not always set as the default tool.
Fixed some menu inconsistencies between find results, context menus, and map popup menus.

Changes made from version 4.1.0 to 4.1.1:

Fixed an issue where BaseCamp was not responding if a certain GPI file (006D135900.GPI) was present on the device.
Fixed an issue where BaseCamp did not seem to recognize some MTP devices (it was taking several minutes for BaseCamp to display the device). Device detection of such devices should now be much faster.
Fixed an issue with Garmin cloud where syncing between Mac and PC would not work properly.
Fixed an issue with 'Restore from Previous Version'.
Fixed an issue where using the city finder (in the Find Options 'Location' textbox) would lead to a crash if the map did not support city searches.
Fixed an issue with city search on the Global Map.
Fixed an issue with user data search.
Fixed a start-up issue.

Changes made from version 4.0.5 to 4.1.0:

Added support for Garmin Cloud Storage.
Added support for searching and displaying Custom POIs from devices (GPI file support).
Added ability to report map errors directly from within BaseCamp.
Added support for new statistics track extension, this should allow BaseCamp and future devices to have the same track statistics.
Added better error messages for adventure publishing failures.
Implemented Part I of Find experience rework (simultaneous searches, less confusing input boxes, added Find menu, added support for user data search).
Improved behavior when editing or deleting route and track points in a list, BaseCamp now remembers the position in the list.
Improved decimal precision for low speeds.
Improved 'Send To Device' and 'Receive From Device' dialogs.
Fixed an issue where BaseCamp would erroneously prompt for Geotagged photos on Garmin-mode devices.
Fixed an issue where the folder data list size wasn't preserved.
Fixed an issue with importing KML files from Google Earth.
Fixed an issue where the original routes were not restored after cancelling during the calculation phase of a route join.
Fixed an issue where single digit entry into Arrival/Departure times may not get committed to database.
Fixed an issue with displaying waypoint comments that take more than 1 row.
Fixed an issue with missing/corrupt system services. BaseCamp now prompts the user.
Fixed an issue with sending dog icons to older Garmin devices.
Fixed an issue with resetting the activity profile.
Fixed an issue where BaseCamp sometimes would not sync with devices.
Fixed an issue with restore.
Fixed some issues with Undo and Redo.
Fixed shutdown issues.
Fixed an issue in Danish when viewing route properties.
Fixed issue where BaseCamp would not display 'TOPO Sweden V3 - Svealand'.

Changes made from version 4.0.4 to 4.0.5:

Fixed issue when changing list or folder selection with nearest results shown on the map.
Fixed issue when changing list or folder selection while in the process of drawing a route.
Fixed issue with find toolbar visibility not being remembered between application runs.

Changes made from version 4.0.2 to 4.0.4:

Fixed some issues with publishing adventures.
Fixed an issue with remembering the layout of the data and map panels.
Fixed an issue with remembering the positioning of the toolbars.
Fixed some layout issues in Windows XP.
Fixed ordering of photos during adventure playback.
Fixed various stability issues with route properties.
Fixed issues with the route and track join.
Fixed some device and adventure transfer issues.
Fixed issue with gdb and kml import.
Fixed issues with adventure playback.
Fixed an issue with exporting waypoints with dog icons.
Fixed an issue where orphaned route via point would remain on the map in certain cases.
Fixed an issue where geotagged photos were not being cleaned up after deletion.
Fixed an issue with the notes tab where links where not being stored properly.
Fixed various other stability issues.
Improved speed for displaying the properties of an adventure for the first time.
Improved transition when entering/leaving adventure playback mode.

Changes made from version 4.0.1 to 4.0.2:

Added smoothing of speed and heart rate graphs.
Improved Track Join inside of an Adventure
Change to not show the 'Filter Results' option in the find results if there are no results to filter.
Fixed layout not being remembered properly between application runs.
Fixed an issue with some card products not being recognized. Unfortunately this requires re-indexing all card products.
Fixed layout being different after exiting from Adventure playback.
Fixed an issue with the 'References' tab page not being properly updated when changing selection.
Fixed an issue with route shaping point info being lost when erasing points from a route.
Fixed an issue with track color being changed when tracks are filtered.
Fixed an issue with not updating the summary in the route dialog when points are unselected.
Fixed some issues with login and re-login for MyGarmin services
Fixed doing an undo while drawing a route ending the route. Now only the last via point is removed.
Fixed an issue when importing photos with invalid time EXIF data.
Fixed text messages from Basestation devices being repeatedly notified
Fixed an issue with route join
Fixed an issue with the route divide tool
Fixed an issue with duplicating routes
Fixed an issue with adding waypoints into routes in an Adventure
Fixed an issue with line breaks being repeatedly added to GPX files
Fixed an issue with click & drag on the map hiding properties dialog
Fixed an issue with importing KML or KMZ files that had downloadable content.
Fixed an issue with creating a waypoint via the map context menu when a list folder is selected
Fixed an issue where the waypoint ordering was not updated when changing the main track in an Adventure
Fixed an issue when clicking on the 'X' to remove a tag from the References tab page.
Fixed an issue when changing map detail level before putting focus into the map views.
Fixed an issue where the creation date of a photo waypoint didn't match the creation date of the photo's EXIF data
Fixed an issue with waypoints sometimes not being shown on the map

Changes made from version 3.3.3 to 4.0.1:

Added Garmin Adventures, including; authoring, publishing, online search, downloading, playback, and transfer to supporting devices.
Added arrival, departure, and layover times for route via-points.
Added a context menu on the map for the hand and selection tools.
Added support for waypoint creation date, which will not be changed when updating the waypoint.
Added a list in the waypoint properties dialog to display which routes a waypoint is used in.
Added ability to collapse folder groups (like 'My Collection' or 'Devices').
Added support for temperature and pressure in track statistics and graphs.
Added support to delete waypoints that are included in a route.
Added Basestation mode for compatible Astro, Rhino, and Alpha devices.
Added more columns to the data view for Waypoints, Garmin Custom Maps, GeoCaches and Photos.
Added support to enter position using alternate grid/datum on the 'Recenter Map To' dialog.
Added option to save original track when filtering it.
Added display of the 'placed on' date for GeoCaches.
Added intersection search when using the 'and' or '&' keywords.
Added ability to bulk-edit more fields for waypoints.
Added ability to create waypoint from find results on the map.
Added ability to transfer subscription-based BirdsEye imagery that contain failed downloads.
Added ability to toggle the visibility of all toolbars.
Added display of postal code in address search results.
Added a read-only 'Unlisted Data' list that contains all items that are in no other lists.
Added ability to create a route from a named trail.
Added ability to import into folders and lists (and not always import into My Collection).
Added header for the folder data list.
Added ability to duplicate geotagged photos.
Added link the BaseCamp license agreement in help menu.
Added ability to undo/redo on supported devices.
Added ability to drag and drop folders from the file system to BaseCamp (when supported data is present).
Added ability to accept Google Maps coordinate format when centering map at position.
Added new dog icons.
Added waypoint creation date to the waypoint properties dialog.
Added option to encourage the user to recalculate a route when the map that the route was created with isn't found on the device.
Added prompt when duplicating a route if BaseCamp should also duplicate the waypoints used in the route.
Added zooming via Alt/+ Alt/- keys. This is a coarse zoom which zooms in or out a number of zoom levels.
Added toolbar and menu for simpler device transfer options.
Improved display when many photos are at the same spot on the map.
Improved XML processing (so it should now be possible to import and export larger gpx files than previously).
Improved the measurement tool's display of measurement information.
Improved behavior when importing data into an already selected list or folder.
Improved behavior when double-clicking on a list. BaseCamp will now zoom to the data contained in that list.
Improved default file name for backup. The default name now contains the current date.
Improved the validation of map coordinates in the Recenter dialog.
Changed the simple route dialog to transition into the route properties so the route can be edited further.
Changed icon for gas stations with convenience stores to be the gas station icon, not the shopping cart.
Clarified the find options (Center of view, Center of selected items). Added hint text to make usage more clear.
Cleaned up toolbar, hide tools that are used less often by default, always show waypoint, route & track tools.
Cleaned up route options, made it easier to create custom route settings.
Fixed the long find toolbar initialization delay after starting BaseCamp or switching to a new map.
Fixed an issue where a device's SD card would not always be recognized by BaseCamp.
Fixed numerous issues with finding addresses.
Fixed an issue where the toolbar would not display the same way after restarting BaseCamp.
Fixed an issue where the find toolbar would always be displayed after restarting BaseCamp, even though the user chose to hide it.
Fixed area calculation for tracks.
Fixed an issue where you could not rename an item from lower case to upper case (like renaming 'washington' to 'Washington').
Fixed issue where the Geocache symbol was not consistent with found status when importing or adding a geocache.
Fixed an issue where the preferences dialog would not remember the last sub-selection.
Fixed an issue with remembering the data filters when switching between app modes.
Fixed an issue where turning off the display of points would leave a lot of 'shopping cart' POIs on the map for certain map products.
Fixed an issue where the selection was lost when left-clicking on the map with the hand tool.
Fixed issues with route/track creation and joining.
Fixed issues with deleting data on devices.
Fixed issues with creating routes from tracks.
Fixed issue when BirsdEye selection box was dragged too far North.
Fixed issue with displaying custom maps on devices.

Changes made from version 3.3.3 to 4.0.1:

Changes made from version 3.3.2 to 3.3.3:

Fixed an error when a new list folder was created while a balloon was visible on the map
Fixed an error when creating waypoints or tracks over 3rd party maps that are missing files
Fixed some errors when receiving from a device
Fixed an error when using BaseCamp with an iPhone connected
Fixed an issue with MTP devices with cards greater than 8 GB in size

Changes made from version 3.3.1 to 3.3.2:

Don't disable the data filter options in the view menu while in 'map w/o filters' mode.
Fixed a crash when dividing a route with more than one reference to the same waypoint.
Fixed crashes when reading a map installed on a card when there are ID conflicts.
Changed the range of allowed ID's for card products, this has the side effect of requiring all card products to be re-indexed.
Fixed a crash when a route with the 'None' profile route doesn't have preferences.
Fixed a problem where a route that was switched from the 'Direct' profile to 'None' would ever auto-route.
Fixed a crash when deleting all waypoints from a route.
Fixed a shutdown crash.
Fixed a problem with line breaks in GPX files.
Fixed a problem when sending.
Changed the default value for the mountain bike profile state highway avoidance.
Fixed a crash related to bad data imported from old MapSource GDB files.
Fixed an issue when tracks lose all data besides position after doing a sequence of divide, undo, and redo operations.
Reduced the size of the 'Welcome to BaseCamp' dialog so that it fits on smaller screens.
Fixed a problem with the application hanging after doing a 'Reset Options' with some other dialogs open.
Fixed a crash when dividing a route from the route points list when that route had more than one reference to the same waypoint.
Fixed a crash when changing folder or list selection.

Changes made from version 3.2.2 to 3.3.1:

Added collapsible list folders and sub-lists for improved organization.
Added shaping point support for zumo devices like done in MapSource.
Added explicit support for shaping points. These will be transferred to supporting devices.
Added support for transfer of waypoint categories on supporting devices. These are displayed in BaseCamp as lists.
Added more activity profiles, with improved activity routing on supported maps.
Added specific avoidances for various road classes, removed the road selection slider.
Added custom activity profiles.
Added keyboard short-cuts for editing tools (divide, insert, erase).
Added a tools menu for easier discovery of tool keyboard shortcuts.
Changed to make GPX files on a memory card directly editable.
Changed to read all GPX files on a memory card, similar to how devices behave.
Improved graphing of track data.
Improved graphing when multiple routes or tracks are selected.
Improved layout of geotagged photo, waypoint, route, and track properties.
Added additional statistics to route and track properties.
Added 'Center on map' check-box on route and track dialogs.
Added an easier way to add waypoints to routes (Insert Waypoint button).
Added additional data fields to waypoints (such as address and phone number).
Added display and updating of date last modified for waypoints.
Added display of lists that contain this data item to properties.
Added receiving geocache visits from devices.
Added logging geocache visits on OpenCaching.com.
Added printing of geocaches.
Added alternate notification mechanism (less annoying pop-ups).
Added display settings to adjust width of routes and tracks.
Added support for importing waypoints and tracks from KML/KMZ files.
Added suggested file name when exporting (so it isn't always 'untitled').
Added more map details for higher detail setting.
Added data filters to map view.
Added preserving the dialog size for each data type.
Added option to reset track's altitude to map data.
Added functionality to remember display feature settings per profile.
Changed 'Remove List and Contents' to 'Remove list and unique contents'.
Added Shift-Delete short-cut for 'Remove list and unique contents'.
Added a confirmation dialog for 'Remove list and unique contents'.
Added hiding of Activity profiles.
Added creating OpenCaches from waypoints.
Added calculating ascent and descent for direct routes.
Added indication of data filter visibility state on the data list.
Added recalculation of more than 1 route at a time.
Improved printing of routes and tracks.
Change to prevent property dialogs becoming lost off screen after screen resolution changes.
Fixed issues with sending routes to the zumo.
Update waypoint references to new map data when recalculating routes.
Fixed any profiles from BaseCamp 3.2 that have invalid routing preferences (ie invalid vehicle types and incorrect avoidances).
Fixed list in-place rename requiring pressing enter to complete the edit.
Fixed the 'Reset Headers' context menu being displayed after renaming an item.
Fixed issue writing out altitude when exporting to the GDB file format.
Fixed track filtering 'automatic mode' for tracks with no time information.
Fixed elevation profile labels for Windows XP (no longer invisible).
Fixed issue when duplicating a route. BaseCamp will now also duplicate the waypoints in that route.

Changes made from version 3.2.1 to 3.2.2:

Fixed an issue with migrating waypoints with thumbnails from previous versions of BaseCamp to 3.2.1. This issue could have corrupted the database.
Fixed an issue with tracks that had been duplicated becoming corrupted.
Added a prompt to notify the user when data loss might have occurred.
Added a 'restore from previous version' menu item.
Added support for exporting of fitness data (heart rate and cadence) in tracks.
Changed to attempt to fix the paths in Garmin Custom Maps (KML ground overlay) files at start-up without notifying the user that there were problems with the file.
Changed the message displayed at start-up when the current video mode/card doesn't support 3D.
Improved initial download size estimates for some BirdsEye products.
Fixed some issues with undo/redo.
Fixed several issues related to application shutdown.
Fixed an issue with not recognizing Garmin mode USB device (such as the GPSMap 60) arrival and removal.
Fixed several issues related to aborting transfers to Garmin mode USB devices.
Fixed some issues related to ejecting mass storage devices.
Fixed some issues with changing folder selection while using the BirdsEye wizard.
Fixed an issue with reading geotagged photos from many smartphones.

Changes made from version 3.1.3 to 3.2.1:

Moved the various property tabs to a separate dialog
Added swapping the map and data list UI regions
Added activity profiles to allow easier changes between common routing configurations
Added activity profile selection dialog at startup, improved migration of existing route settings and routes
Added dragging photos onto the map views
Added dragging files into My Collection and the user data list
Added better preserving app state when restarting (selected tool, selected folder, selected view modes, etc)
Added support for restoring backups from different computers
Added geocache search integration with OpenCaching.com
Added photo sharing site upload (currently for Picasa)
Added track statistics that correspond to the selection in the track points list
Added additional statistics to the elevation profile
Added display of elevation profile when batch editing routes or tracks
Added heart rate and cadence to the track points list and elevation profile
Added route to track conversion
Added display mode for geocaches
Added the 'Duplicate' menu item for most user data types
Added continuation of route/track drawing when switching between tools
Added route avoidance checkboxes to the route options (such as 'Avoid U-turns')
Added a basic dialog for creating routes
Added draw order control for new BirdsEye Imagery that is downloaded
Added user selection of application language
Added option to restore the application to default settings
Added tips dialog when entering full screen mode
Added a keyboard shortcut to snap the map back to North up
Added file import/export support for the TCX file format
Added file export support for tab-delimited and comma-delimited text
Added properties and create waypoint commands to the list of POIs that is displayed when hovering on the map
Added optional collection of analytics to help us improve the application
Added display of the detailed coverage region of card/device based maps
Added notification to user when updates are available for devices
Added receiving FIT course points and activity data from many fitness devices. These are converted into waypoints and tracks.
Added support for the GroundSpeak geocaching 1.0.1 extension
Changed geotagging photos from a track to add links to those photos in the track
Changed to not allow changing the location of geocaches when they are part of a route
Changed the divide tool to create a new waypoint or trackpoint at the division point
Changed drawing style of routes and tracks to use thinner lines
Fixed issue where we didn't always remove all waypoints created as part of a route
Fixed issue with adding and removing links on various property tabs
Improved find address near center of screen
Removed filtered routes

Changes made from version 3.1.2 to 3.1.3:

Added support for handling changes to LOC file format.
Improved error handling for various map issues.
Improved error handling for overlay issues.
Changed default name of BirdsEye Imagery created from other user data to reflect name of selected item.
Fixed issue where the basemap from the GPSMAP 78s was not displayed.
Fixed issue where Topo Australia map was not displayed.
Fixed issue where the Worldwide Aviation Basemap was not displayed correctly.
Fixed issue with changing selection after removing waypoint from route.
Fixed issue with deleting routes that span the Anti-Meridian.

Changes made from version 3.1.1 to 3.1.2:

Added localization for Simplified Chinese, Korean, and Thai.
Added the ability to move the BirdsEye Create tool selection box.
Added automatic naming of BirdsEyes based on the region of the map it is over.
Fixed issue with creating user data on Windows XP with the property tab splitter shrunken to a very small height.
Fixed problem with not showing the correct map layer for cards that contain raster data (such as GB Discoverer).
Fixed various issues related to the user data filter and selection changes.
Fixed issue with a gap in the distances of the find results.
Fixed drawing of labels behind terrain in the 3D view.
Fixed issue renaming data items in the list if the list wasn't sorted by name.
Fixed an issue migrating routes from 3.0.6 to 3.1.1 that were originally created in MapSource.
Improved recovery from memory allocation issues.

Changes made from version 3.0.6 to 3.1.1:

Added support for multiple new BirdsEye products.
Added support for sorting, searching, browsing and filtering user data.
Added support for ejecting devices from within BaseCamp.
Added support for filtering tracks.
Added support for display of track statistics and temperature.
Added support for time offsets while geotagging photos from tracks.
Added support for editing multiple waypoints, routes and tracks at a time.
Added support for importing geotagged photos.
Added support for full screen mode.
Added support for non-rectangular selection area for BirdsEye downloads.
Improved performance while importing, geotagging, autosaving and routing.
Improved support for various DPI settings.
Reduced memory required by BirdsEye imagery.

Changes made from version 3.0.5 to 3.0.6:

Added support for the GB Discoverer series of products.
Added support for the City Navigator Israel series of products.
Improved memory usage when drawing maps.
Improved auto routing calculation speed.
Improved address searching when searching near 'center of map'.
Improved indexing of map products installed on devices or SD cards.
Changed error reporting for imported files.
Fixed issue when rendering the '&' sign on map labels.
Fixed startup issue related to diacritics or the German Eszett in the database.
Fixed startup issues related to bad 3d settings.
Fixed errors that could occur when changing filtered route settings in the middle of creating a route.
Fixed errors when editing geotagged photos.
Fixed input of custom grid values.
Fixed issues that could happen when changing the map font.
Fixed issues that would result in sections of the map missing when using an NT map product.
Fixed issues when changing datum and grid.

Changes made from version 3.0.4 to 3.0.5:

Added localization for the following languages: Chinese (Traditional), Croatian, Czech, Danish, Dutch, Finnish, French, German, Hungarian, Italian, Japanese, Norwegian (Bokmal), Polish, Russian, Slovak, Slovenian, Spanish, Swedish
Added the ability to unlock BirdsEye Imagery for a specific device.
Added support to recognize European Topographic cards as retail products.
Improved map projection when printing BirdsEye Imagery.
Change to preserve subfolders when writing Garmin Custom Maps.
Change to correctly resolve relative paths in links on waypoints received from devices.
Change to use a more reasonable zoom level when selecting 'Show on map' for a single find result or waypoint.
Change to update the database to reflect missing images when doing a 'Restore' when the images were excluded from the backed up.
Change to preserve selection of device when starting BirdsEye wizard, if a device was previously selected.
Change to read maps on SD cards written to the \Map subfolder.
Fixed auto-routing issues on certain maps.
Fixed copy/paste of geotagged photos from a device not copying the photo.
Fixed possible issues when launching an external file or URL link.
Fixed issues when reading geotagged photos with invalid timestamps.
Fixed displaying postal code twice in POI property balloons in some European maps.
Fixed issues geotagging photos with Asian language paths.

Changes made from version 3.0.3 to 3.0.4:

Fixed startup issue when migrating Garmin BirdsEye imagery from earlier versions of BaseCamp into version 3.0.3.

Changes made from version 3.0.2 to 3.0.3:

Added display of which devices a BirdsEye Imagery is unlocked for.
Added the ability to control which map feature lines are shown.
Improved memory usage for Garmin BirdsEye Imagery and Garmin Custom Maps.
Improved user feedback while transferring to folders and devices.
Improved reported information when Garmin Custom Maps cannot be imported.
Changed to allow transfer of partially downloaded BirdsEye Imagery.
Added ability for BaseCamp to attempt reading all Garmin map images (.img files), regardless of name, from removable media.
Fixed issue when using Find with a map that does not have a city table.

Changes made from version 3.0.1 to 3.0.2:

Eliminated error messages at startup with blank SD cards.
Fixed several printing related issues.
Fixed issue when hovering over the 3D view after turning off lines or areas.
Fixed issue when importing a KML file that didn't contain any visible ground overlays.
Fixed issue with track and route join.
Fixed issue with track and route insert.
Fixed issue with geotagged photos on devices not being read.

Changes made from version 2.0.9 to 3.0.1:

Added download, display, and transfer of BirdsEye satellite imagery to supported devices.
Added download, display and transfer of Garmin Custom Maps to supported devices.
Added the ability to use BaseCamp with the pre-installed maps on a connected device or pre-programmed SD card.
Added poster printing.
Added printing of USGS Quads and other public land survey areas.
Added tools for auto-routes.
The full information set for Geocaches is now correctly transferred to the device.
Improved handling of back-up database.
Improved the drawing speed of certain European maps.
Improved the reading speed and display of Geotagged photos.
Improved stability while running on Windows 7.
Numerous refinements and problem fixes.

Changes made from version 2.0.8 to 2.0.9:

Fixed issue with BaseCamp sending waypoints, routes and tracks to a location on the device that the device doesn't read.

Changes made from version 2.0.7 to 2.0.8:

Added localization for the Traditional Chinese and Japanese languages.
Added 2D display of products that don't contain elevation data.
Improved zooming with mouse scroll wheel.
Corrected issues detecting removable drives.
Corrected issues Geo-Tagging photos.
Corrected issue with the Recenter Map screen marker not displaying correctly in the 3D view.
Corrected issue with printing around the Anti-Meridian at low zoom level.
Importing GPX files now preserves track notes.
Improved rendering performance of selected map products.

Changes made from version 2.0.6 to 2.0.7:

Enlarged the 3D playback arrow.
Corrected the mouse scroll wheel behavior on the Cache Log.
Addressed various printer related problems.
Now showing more information relating to printer and print driver problems.
Corrected various problems encountered while launching BaseCamp.
Corrected some toolbar layout issues.
Corrected some problems that were occurring during transfer to an external device.
Fixed a problem which was occurring under certain conditions when deleting items from a folder.
POI searching is now working for Topo Morocco.
Driving speed on routes now works correctly.

Changes made from version 2.0.5 to 2.0.6:

Added a worldwide base map for use with BaseCamp.
Automatically named routes will now be named correctly when created in a folder.
Improvements to undo and redo functionality.
Better handling of tracks that only contain 1 point.
Find now works if the location is set to 'Center of Screen'.
Improved print preview functionality on smaller screens.
Grid lines print correctly.

Changes made from version 2.0.4 to 2.0.5:

Error reporting improvements to gather additional information when BaseCamp crashes.
User settings are preserved after a version upgrade.
Updated magnetic variation data.
Geotagged images will be shown in the correct orientation and drawn faster.
Skip printing blank pages for routes without an elevation profile or notes.
The list of user waypoints shows the symbol or image shown on the map.
Improved searching for addresses outside of the United States.
Added additional scroll wheel support.
Fixed errors when opening non-English help.
Preserve the pitch angle of the 3D map.

Installation Instructions

Download the Garmin BaseCamp update file into a directory on your hard drive. (i.e., c:\downloads).
Change to the directory in which you downloaded the files, (i.e., c:\downloads), and run the executable file (.exe). Follow the onscreen instructions to complete the update of your BaseCamp installation.