Updates & Downloads


GPS 36 software version 2.50

as of April 24, 2000

Download (236 KB)

View installation instructions and system requirements

Notes:


Change History

Changes made from version 2.23 to 2.50:


Installation Instructions

  1. Download the appropriate self-extracting zip file for your GPS unit into a directory on your hard drive. (i.e., c:\garmin).
  2. Unzip the files into this directory by running the downloaded executable file (.exe).
  3. Connect your GPS unit to a free serial port (Com 1, 2, 3, or 4) on your PC with a PC Interface cable.
  4. Turn on your GPS unit and ensure the Interface setup is set to 'GRMN/GRMN HOST,' 'Garmin,' or 'DATA TRANSFER SLAVE' mode, depending on the specific Garmin model.
  5. From the DOS prompt, change directory (CD) to the directory in which you unzipped the files, (i.e., c:\garmin), and run the update program: updatesw.exe.

    The upload process should take approximately 3-10 minutes to complete. When the upload process is complete, the unit will reset itself and turn on normally.

System requirements

  1. IBM-compatible PC (386 or higher microprocessor running DOS, Windows 3.1x, Windows 98, Windows ME, Windows 2000, or Windows NT 4.0) with an available Com 1, 2, 3, or 4 port.
  2. PC Interface Cable for your GPS unit. The PC Interface Cable may be purchased through your local Garmin distributor or ordered direct from our Online Store.