Updates & Downloads

---

eTrex Legend Cx/Vista Cx/Venture Cx (region file only) software version 3.50

as of August 7, 2019

Use Garmin Express to install this file.

(3.34 MB)

View system requirements

Notes:

• WARNING: If this software is uploaded to a device other than that for which it is designed, you will not be able to operate that device.
• If attempts to upload software fail, you may need to return the device to Garmin® for service.

---

Change History

Changes made from version 3.40 to 3.50:

• Fix incorrect time/date/year issue

Changes made from version 3.30 to 3.40:

• Fix tracks snap to roads issue when 'Lock On Road' is off.
• Fix minutes to hours roll over issue.

Changes made from version 3.20 to 3.30:

• Correct disorderly waypoint data index in previous version.

Changes made from version 3.10 to 3.20:

• Fix potential lock up when SD card installed.
• Fix the contour data intermittently drawing over interstates of Topo Map.
• Improve the blue shading color when using the setting 'Marine colors' in Daytime display mode.
• Fix incorrect highlight index at unit field in 'Area Calculation' page after select reset in menu.

Changes made from version 3.00 to 3.10:

• Correct time scale of altimeter chart (Vista only).
• Add support for maps greater than 2 GB.
• Increase precision of user grid input field.
• Disable the calculation message when GPS is off.

Changes made from version 2.90 to 3.00:

• Fix Marine map POI issue.

Changes made from version 2.80 to 2.90:

• Correct German translation of 'delete all waypoints'.
• Fix data card unlock failure when 2 cards of the same map set are used in one device.
• Improve sun times for polar regions.
• Fix issue where ETA in non motor vehicle modes can be unreasonably short.
• Increase precision of distance measurement to the cursor on the map page.
• Allow backlight adjustment on the track back point selection page.
• Fix shutdown when editing Estonian Grid coordinates.
• Correct daylight saving time for New Zealand.
• Improve selection of the names of cross roads with NT maps.
• Correct potential shutdown when viewing a vertical profile.
• Correct European word translation of 'Find' and 'Mark'.
• Support multiple languages in American version.

Changes made from version 2.70 to 2.80:

• Fix potential shutdown when searching UK extended postal codes.
• Ensure that all UK extended postal code search results are shown.
• Enable the Quit button function on the geocache compass page.
• Change number of lines of text in the address field on map feature review page from 4 to 6.
• Improve robustness when recovering from a partial map load.
• Added better compatibility with Mac computers in USB mass storage mode.
• Improved pedestrian route calculation for shortest distance method.
• Added ability to recalculate a direct goto route.
• Fix issue where MPC maps could potentially cause a shutdown.
• Address issue where nearest points search would skip some points.
• Changed datum used in the SWEREF 99TM grid to GRS80.
• Changed datum used in the Estonian grid to GRS80.
• Correct the Swiss grid calculation.
• Fix potential shutdown when using TOPO West 1999.
• Fix potential shutdown on track setup for data card when track log files have long file names.
• Corrected French translation for 'Log track points'.
• Improved promptness of the turn review page.
• Fix potential shutdown when propagating in a cul-de-sac across a map boundary.
• Added more time zones.
• Add A905/D900 unlock code communication protocol.
• Make route recalculation on MPC maps behave like City Navigator maps.
• Remove lithium ion as a battery choice.

Changes made from version 2.60 to 2.70:

• Updated daylight saving time dates.
• Add capability for 2 wide data fields on map, compass, and highway pages.
• Add capability for 1 wide data fields on map page.
• Add data card information page.
• Add selectable alarms for proximity waypoints and custom POI.
• Improve labeling and scanning of custom POI on the map page.
• Add capability to see vertical profile of an autoroute using DEM topo data.
• Fixed issue with incorrect dates showing when editing the data field for Sun & Moon page and Hunt & Fish page.
• Fixed issue where invalid find menu options could show when using the Auto Order feature.
• Fixed issue where route names would be converted to upper case during editing.
• Fixed issue where invalid related software can be selected when using the WebUpdater.
• Fixed issue where keyboard characters won't update when editing the Welcome message.

Changes made from version 2.50 to 2.60:

• Fixed problem of shutdown when viewing map Topo Great Britain v2.
• Improved drawing of lines for MPC maps.
• Reduced variation in battery gauge indicator.
• Fixed display scrolling issues when searching for roads.

Changes made from version 2.40 to 2.50:

• Add ability to put unit into USB mass storage mode via the interface setup page to facilitate copying track files from data card to PC.
• Improved the stability of MicroSD card data read and write.

Changes made from version 2.30 to 2.40:

• Improve path nighttime color for map Topo Great Britian v2.
• Add feature to save active track log to file on data card.
• Enhance layout and functionality of tide station chart information.
• Add new time zones for major cities in the U.S. and Europe.
• Fix UTC offset for Las Vegas time zone.
• Improve reset function of timer lap distance.

Changes made from version 2.20 to 2.30:

• Improve stability of unit after loading a large map set.
• Increase loadable maps to 2025.
• Enhance visibility of paths in map Topo Great Britian v2.
• Vista only: Fix potential lockup on Welcome screen when the track log has been turned off and cleared and then the unit is powered off and back on.

System requirements

1. IBM-compatible PC running Windows 2000 or later operating system and an available USB or Com 1, 2, 3, or 4 port.
2. PC Interface Cable for your GPS unit. The PC Interface Cable may be purchased through your local Garmin distributor or ordered direct from our Online Store.

---