Updates & Downloads
Fishfinder 160 Blue software version 2.10
as of July 31, 2003
View installation instructions and system requirements
Changes made from version 2.04 to 2.10:
- Update the French translation.
- Unit will now reacquire the bottom faster when moving quickly over large changes in bottom depth greater than 200 ft (60 m).
- Sped up re-acquisition by not alternating frequency unless the user has chosen dual-frequency mode.
- Updated company name and copyright information.
- Added a lower limit to gain stepping when trying to reacquire the bottom in shallow water.
Changes made from version 2.03 to 2.04:
- Improved update efficiency by reducing the number of STC computations needed.
- Corrected blanking error when a zoomed sonar image undergoes a range change.
- Added more filtering to water temperature.
- Improved noise rejector some. Now less likely to reject weak signals when rejection isn't necessary.
- Use correct fish ID bitmap transforms. Transformations were working correctly by accident, now they work on purpose.
- Changes to transmitter clock duty cycle to more evenly distribute transmit energy over the duration of the transmit pulse.
Changes made from version 2.02 to 2.03:
- Improved performance when switching between depth number 'from chart' and 'auto.'
- Corrected setting of speed calibration when calibration is cancelled before it finishes.
- Added Croatian language.
Changes made from version 2.01 to 2.02:
- Turn off transmitter if unit is powered on in an overvoltage condition.
Changes made from version 2.00 to 2.01:
- Changed 200kHz, 50kHz, and dual icons to narrower versions to maximize usable screen space.
- Guarantee power down beep completes before powering down unit.
- Remove screen flash on unit power up.
- Make sure that the digital depth correctly flashes when the depth lock is lost in 'From Chart' mode.
- Updated Swedish translations.
- Updated Portuguese translations.
- It is recommended that you disable screen savers or other programs running on your PC while you go through the update process. Disruptions to the update process may render your GPS inoperable. If the transfer is interrupted, turn off the GPS and then turn it back on. Reboot your PC, go to step #9 and attempt the download again. GARMIN is not responsible for failed downloads of operating software to the GPS and factory resetting the GPS unit will fall under our Flat Rate Repair Policy.
- Click on "Download" and choose to save the file to your computer.
- Choose a location where you can easily locate the file by saving it to a location such as the "My Documents" folder or to "C:\".
- Once the download is complete, go to the location where you saved the file.
- Locate the downloaded file and double-click on it. This will launch the Win-Zip Self Extractor. This program compresses the data to allow for a faster download of the needed files.
- A program window will appear asking you where to "Un-zip" the files. This is by default C:\Garmin. You can change this location if you like. Be sure to note where the un-zipped files are going to allow you to find them!
- Click on the button labeled "Un-zip".
- Once the un-zip process is complete, click on the "Close" button to exit the Win-Zip Self Extractor.
- Open the C:\Garmin (or other folder where you un-zipped the files), locate the file named "Updater" and double click on it.
- Connect your GPS to your computer using a GARMIN PC Interface cable to an open serial port. Turn the GPS on, place it in Simulator mode (refer to your owner's manual for instructions) and verify that the Interface Mode (found under the Main Menu page, refer to your owner's manual for instructions) is set to GARMIN, GRMN, GRMN/GRMN, or Data Transfer/Host mode.
- Click on the "OK" button on the Updater program window to start the data transfer.
- IBM-compatible PC running Windows XP or later operating system and an available Com 1, 2, 3, or 4 port.
- PC Interface Cable for your GPS unit. The PC Interface Cable may be purchased through your local Garmin distributor or ordered direct from our Online Store.