GARMIN iQue Software Upgrade Information
Software Version 5.2.1.r6

http://www.garmin.com

------------------------------------------------------------

WARNINGS:
    If this software is uploaded to a GPS unit other than the product for
    which it is designed, you will not be able to operate that unit.

------------------------------------------------------------

Instructions for uploading the new software to your iQue 3600 using Microsoft
Windows 98/ME/2000/XP:

1.  Download and save the iQue3600English-only_Release6.zip update file to a
    location on your computer.  This file will need to be located later so please
    locate this in a readily accessible folder.

2.  Place the iQue in the cradle and perform a HotSync on the unit to backup 
    any of your current data.  Please ensure that the iQue is fully charged 
    before proceeding with the software update process.

3.  Perform a Hard Reset of the unit.  To perform this procedure you will need 
    the reset tip tool, which may be unscrewed from the head of the Stylus that 
    came with your iQue.  The following instructions are also included on page 
    1.6 of the iQue 3600 Integrated Handheld Operating Instructions manual.

    A. With the unit turned off, press and hold in the reset button on the back
       of the unit using the reset tip tool.
    B. Continue to hold in the reset button while you press and hold the power 
       button.
    C. While holding in the power button, remove the reset tool from the reset 
       hole.  
    D. Continue holding the power button until the Palm logo appears on the 
       screen.  
    E. Once the Palm logo appears, release the power button.
    F. Press the up button when prompted to confirm the erase of user data. 

4.  A new user will need to be created for use during the software update process.  

    A. Start by launching the Palm Desktop application
    B. Go to the Tools menu, then select Users... to display a list of the 
       current users.
    C. Click on the New... button to display the New User window.
    D. Enter a unique name for the user, such as Release6, then click Ok.
    E. Close out of the Users window by clicking OK.

5.  If you are using Intellisync Lite or another synchronization program, from 
    within that program configure your new user to synchronize with the Palm 
    Desktop or any available alternative that does not contain your primary data.  

6.  Install the software update to the new user (Release6).

    A. Double click the iQue3600English-only_Release6.zip, then unzip to a 
       location that can be easily found, such as the Desktop.  There will be 
       three files: Updater.prc, UpdaterData.pdb, and a copy of these 
       instructions (iQue 3600 Release 6.txt).
    B. Double click the Updater.prc file.  This will open the Palm Desktop 
       Install Tool.  
    C. Select the new user that you have created (Release6), and click OK. 
    D. Double click the UpdaterData.pdb file to place it in the Palm Desktop 
       Install Tool. 
    E. Close the Palm Desktop Install Tool by clicking Done, then click OK.

7.  Place the iQue in the cradle and initiate a HotSync.  A Select User window 
    will appear.  Select the new user (Release6) that you have created for the 
    update.  The Updater.prc and UpdaterData.pdb files will then be installed 
    on the iQue.

8.  You may update the iQue while it is in or out of the cradle. However, once
    the update has begun, do not place the iQue into or remove the iQue from the
    cradle. This could interrupt the update and require you to send your unit to
    Garmin for repair.  Also, it is very important that the iQue does not lose
    power during the update process, so please verify that the battery is fully
    charged if you won't be powering it externally. Failure to charge the iQue
    fully prior to updating the software may result in a permanent loss of the
    OS requiring you to send your unit to Garmin for repair.

9.  Locate the Application called Updater.  It can be found under the category 
    of All.  Once you have located the Updater Application, tap on it once.  
    Then follow the on-screen instructions.  

10. After about 4 minutes, the green light at the top of the unit will turn off.
    Once the green light at the top of the unit has disappeared, remove the iQue
    from the cradle (if necessary) and perform a Soft Reset using the reset tip
    tool. To perform a Soft Reset, press the reset tip tool into the Reset hole
    on the back of the iQue. The unit will restart within about ten seconds of
    the Soft Reset. Follow the on-screen setup instructions.

11. Verify that the software update was successful.

    A. Go to the Launcher (tap on the house icon in the lower left corner) 
    B. Tap the menu icon (it is the "down-arrow" icon just to the right of the
       house icon in the lower left corner).  
    C. A drop down menu will appear.
    D. Tap the Info... menu item.
    E. Tap the Version button at the bottom of the screen.  The update was 
       successful if the second line of the screen displays Palm OS software 
       v.5.2.1r6.

12. If you are using Intellisync Lite or another synchronization program, from 
    within that program make sure the current user is set to the User name that 
    you have been previously using to identify your iQue.

13. To restore your previous information to the iQue, place the iQue in the 
    cradle, then perform a HotSync. A window will appear asking to select a 
    User.  Select the User name that you have been previously using to 
    identify your iQue on your PC, and your information will be restored to 
    the iQue.

14. Delete the temporary user (Release6) by going back to the Users window in 
    the Palm Desktop.  Select the user, click Delete... then click YES to 
    delete it.

------------------------------------------------------------

Changes Made from Versions 5.2.1.r5 to 5.2.1.r6:

Que Applications

1. Corrected a problem that caused lockups in QueTurns on certain routes.
2. Improved 'Find Along Route' in QueFind for metric values.

------------------------------------------------------------

Changes Made from Versions 5.2.1.r4 to 5.2.1.r5:

Routing:
1.  Improved routing support for tolled roads particularly in Austria and Switzerland.


------------------------------------------------------------

Changes Made from Versions 5.2.1.r3 to 5.2.1.r4:

GPS:
1.  Added support for QueAPILib 3.0.

Mapping:
1.  Improved the display of waypoints by re-highlighting them after zooming,
    if they were previously highlighted.
2.  Changed the active track log color to improve visibility.
3.  Corrected the display and highlighting of waypoints after creating them
    from QueMap.
4.  Corrected the Indonesian Southern grid, which had been using the wrong
    longitude of origin.

Que Applications:
1.  Added support for 24-hour time display, as well as other PalmOS supported
    formats, in certain Que applications.
2.  Improved the display of pre-1990 dates in certain Que applications.
3.  Increased the maximum waypoint limit from 4096 to approximately 10000.
4.  Corrected a problem with the map’s zoom popup that could sometimes occur in
    the Address Book application.
5.  Corrected handling of next appointment field in QueClock when private records
    are used.
6.  Corrected a problem that caused certain applications to exit if the escape
    button was pressed while a Turn Popup window was being displayed.  Now it just
    closes the Turn Popup.
7.  Corrected a problem where the unit wouldn’t auto-off if an alarm occurred while
    in QueVoice and the alarm message wasn’t manually dismissed.
 
PIM:
1.  Corrected a problem with the manual creation of waypoints in the Address Book
    while using the Indonesian Irian, Indonesian Southern, Swiss, Taiwan, Dutch,
    and Qatar (QNG) grids.
2.  Updated the First Aid waypoint symbol.

SD/MMC:
1.  Improved handling of large memory cards in CardInfo.

Searching:
1.  Corrected a problem searching Fishing HotSpots maps.

System:
1.  Corrected a problem with the Voice Guidance volume not always staying at
    the value at which it was set.
2.  Broadcast the sysExternalConnectorAttachEvent & sysExternalConnectorDetachEvent
    PalmOS notifications when something is attached to or detached from the
    Universal Connector.

----------

Changes Made from Versions 5.2.1.r2 to 5.2.1.r3:

Audio: 
1.  Added ability to control bass boost. 
2.  Made recording more robust. 
3.  Improved stereo sound playback.

GPS: 
1.  Added QueHunt&Fish and QueSun&Moon applications. 
2.  Corrected a rare problem that prevented the unit from acquiring satellites. 
3.  Improved warnings when setting a new location or elevation is not allowed.

Navigation/Routes/Routing: 
1.  Improved behavior when Route and Track memory becomes full. 
2.  Improved routing in certain unusual circumstances. 
3.  Added “Best-order” via point sorting. 
4.  Added the ability to cancel a Detour. 
5.  Improved visibility of route destination by drawing a checkered flag at the 
    destination point when arriving. 
6.  Always re-center the map on the vehicle after calculating a route. 
7.  Improved overall unit responsiveness when navigating extremely dense maps. 
8.  Eliminated rare instances of drawing routes backward through roundabouts.

Mapping: 
1.  Added User Grid support. 
2.  Updated the Austrian datum. 
3.  Added the ability to view tide point information. 
4.  Added the ability to measure the distance between two points using the 
    “Measure Distance” item in the “Que” menu of QueMap. 
5.  Improved default map zoom settings.

PIM: 
1.  Added ability to set a negative altitude for a waypoint. 
2.  Increased the number of waypoint symbols available. 
3.  Improved cooperation between password-entry dialogs and the Datebook. 
4.  Improved beaming of Datebook appointments that have a location attached. 
5.  Added alarm and Next Appointment Today features to QueClock.

SD/MMC: 
1.  Improved card accesses.

Searching: 
1.  Improved marine searching capabilities. 
2.  Added “Near Current Route” searching. 
3.  Improved messages when attempting a search that is not possible with the 
    current map data. 
4.  Improved searching in certain unusual circumstances. 
5.  When pre-filling the address fields in QueFind from the Address Book, 
    correctly recognize the street number and street name, regardless of whether 
    the street number is before or after the street name.

System: 
1.  The REC button will no longer turn the unit on. 
2.  Added brightness adjustment functionality to the Power key. 
3.  The unit now turns off (instead of entering low power mode) after an alarm 
    wakes the unit up when the GPS antenna is open. 
4.  Improved cooperation between password-entry dialogs and the Pen Input Area. 
5.  Voice guidance data copied to an expansion card using the VoiceGuidanceBackup 
    utility will automatically get restored after a hard reset. The 
    VoiceGuidanceBackup utility is available for download separately. 
6.  Added third party developer access to “Low Power Mode”.

----------

Changes Made from Versions 5.2.1.r1 to 5.2.1.r2:

Audio:
1.  Reduced the size of new recordings in QueVoice by storing in a compressed 
    format; this option can be disabled.
2.  Improved MP3 playback while receiving voice navigation guidance.
3.  Improved support for Variable Bitrate MP3's.
4.  Improved playback of low-bitrate and corrupted MP3 files.
5.  Corrected minor issues with MP3 and WAV file detail information.
6.  Restored display of Graffiti area when switching to QueAudio from a 
    high-color app.
7.  Improved speed of changing categories for large QueVoice recordings.
8.  Improved the handling of HotSync when voice navigation guidance is playing.

GPS:
1.  Corrected memory usage in QueGPS.
2.  Correctly display elevation as Mean Sea Level instead of WGS84.
3.  Support for auto-locate mode made more robust.
4.  Prevented incorrect altitudes from keeping the unit from acquiring 
    satellites.
5.  Improved initial satellite acquisition performance at extreme temperatures.
6.  Corrected potential memory corruption problem that could occur when 
    tracking more than one WAAS satellite simultaneously.
7.  Improved the display of Maidenhead grid coordinate data.
8.  Corrected the display of position data when a non-WGS84 datum was being 
    used.

Navigation/Routes/Routing:
1.  Improved navigation instructions to more often include which side of the 
    road the destination is on.
2.  Create an off-road route when routing to a point that is not near any roads.
3.  Added support for canceling route calculation while acquiring satellites.
4.  Improvements to automatic route generation.
5.  Improved routing, mapping, and searching support for unnamed waypoints.
6.  Always provide Turn Preview forms and voice guidance when initially getting 
    on a route.
7.  Eliminated repetitive start navigation messages.
8.  Improved guidance information for certain special cases.
9.  Eliminated asserts for saved routes of certain sizes.
10. Always allow the modal QueRoutes form to be displayed, even if the unit is 
    reset while it is being displayed.
11. Improved QueRoutes support for up/down keys.
12. Improved handling for Editing Vias.

Mapping:
1.  Added a third state (numbers only) for the data fields in QueMap.
2.  Improved map drawing when there is difficulty reading from the card.
3.  Corrected memory usage when repeatedly zooming the map when a route is 
    active.
4.  Corrected appearance of the vehicle on the map in day colors.
5.  Increased the map drawing speed when routing.
6.  Correctly display the distance to exit information when using QueMap's 
    information dialog on a basemap exit.
7.  Increased the amount of information that is displayed for many types of 
    BlueChart data.
8.  Enhanced the visibility of topo map contours by optimizing the color 
    selection.
9.  Corrected display of contour line heights in metric units.
10. Eliminated display of grid line and labels at the 120 ft zoom range in 
    QueMap when they are set to off in QuePrefs.

PIM:
1.  Improved Datebook's handling of appointments that have a note and are 
    location-enabled.
2.  Corrected display of appointments in the Date Book's Week View when the 
    start of the week is set to Monday.
3.  Eliminated obscure Fatal Alert in Memo.

SD/MMC:
1.  Modifications to allow reading of pre-programmed read-only memory cards.
2.  Improved read/write reliability of memory cards.

Searching:
1.  Improved European City Select and European City Navigator address searching.
2.  General improvements to searching.
3.  Improved QueFind stability while calculating a route.
4.  Improved QueFind error-handling when an MMC/SD card is removed and inserted.

System:
1.  Improved USB connection reliability during HotSync.
2.  Eliminated Graffiti-area flashing when erasing Graffiti characters.
3.  Modifications to allow a network connection to be established.
4.  Improved the handling of the low battery condition.
5.  Improved support for Security.
6.  Always restore the backlight to the correct level after a low battery has 
    been charged.
7.  Improved ESC key behavior in applications with non-button controls named "Close".
8.  Improved battery life by setting the initial backlight level to 50%.
9.  Prevented static electricity from causing a hard reset.