Garmin Home  
Aviation
GPSMAP 196
Specifications 

Testimonials 

Screen Examples 



Accessories 

Manuals 

Updates & Downloads 

Aviation Databases 

FAQs 
 Home > Aviation > Products > GPSMAP 196 > FAQs
GPSMAP® 196
 
GPSMAP 196 FAQs - Summary
  1. What kind of mapping is available for the GPSMAP 196?
  2. How do I arrange to get my Garmin unit repaired in the U.S.?
  3. Can I interface my GPS unit with both a VHF radio and an autopilot at the same time?
  4. How can I change the mode of the GPSMAP 196 between land, aviation, and marine?
  5. How do I display the "Panel Page" on the GPSMAP 196?
  6. Will my GPS unit float?
  7. What NMEA version does my GPS unit output?
  8. What is a Waypoint?
  9. Where can I find a complete list of Garmin's WAAS-enabled GPS units?
  10. Does Garmin make an instructional video for my GPS unit?
GPSMAP 196 FAQs - Detailed List

  1. Q. What kind of mapping is available for the GPSMAP 196?

    A. The GPSMAP 196 comes with either the built-in Americas or Atlantic auto-routing basemap. Additional street-level detail that provides the ability to auto-route on both the unit and PC is available from MapSource City Select. This software is available as a part of the "auto kit accessory" (P/N 010-10403-00). This kit includes an auto dash mount, a portable mount, a 64MB data card, MapSource City Select U.S. CD with full coverage, and USB Card Programmer.

    Other compatible MapSource products include BlueChart, Fishing Hot Spots, MetroGuide, U.S. TOPO, and Roads and Recreation U.S. These products do not provide turn-by-turn, auto-routing features.


    Related FAQs:

    1. Can I upgrade my older Garmin unit to a newer Garmin unit?
    2. Does Garmin make an instructional video for my GPS unit?
    3. I can't get my Jeppesen Aviation database update to work with my GPS unit. What can I try?
    4. I cannot establish communication through my PC serial port to my GPS but my PDA connects fine, what can be the problem?
    5. How often are Jeppesen aviation database updates available?
    6. Can I load one of the International Jeppesen databases into my Garmin GPS unit if I currently have an Americas database?
    7. Are the data cards for the StreetPilot III compatible with other Garmin units?
    8. How do I display the "Panel Page" on the GPSMAP 196?
    9. How can I change the mode of the GPSMAP 196 between land, aviation, and marine?




  2. Q. How do I arrange to get my Garmin unit repaired in the U.S.?

    A. In order to get your Garmin unit serviced, please call our technical support department at one of the following numbers:

    tel. 800-800-1020 or 913-397-8200
    fax. 913-440-5488

    Garmin's technical support department is available M-F, 8:00-5:00, Central Time (except holidays).

    When calling technical support, please have available the serial number of the unit, the return shipping address, and a daytime telephone number. A Product Support Specialist will provide you with a Return Material Authorization tracking number (RMA#) and shipping instructions.

    Once a RMA number has been issued, ship the unit (insured) to the following address:

    Garmin International
    1200 E. 151st Street
    RMA Number: (insert the RMA number here - see above)
    Dock Door #1
    Olathe, KS 66062 USA

    Please note: Garmin recommends that return items are shipped through a carrier that offers shipment tracking as well as shipping insurance. When insuring your return item, please declare the full value of the shipment so that it is completely protected in the event that the shipment is lost or damaged. If return items are not shipped through a carrier that offers shipment tracking and the return items are not insured for their full value, you will be responsible for any loss or damage to the product during shipping.

    Please note: The United States Postal Service (USPS) offers limited tracking capabilities and that there is a 30-calendar-day waiting period before the USPS will initiate a trace.


    Related FAQs:
    1. Do I have to subscribe to a service to use my GPS?
    2. Does Garmin make an instructional video for my GPS unit?
    3. Is my eTrex unit waterproof?
    4. What are the differences between the GPS 72 and the GPS 76?
    5. Will my GPS unit float?
    6. Do units of the 72/76 series have audible alarms?
    7. Why can't I get a speed reading from the speed sensor attached to my fishfinder or sounder?




  3. Q. Can I interface my GPS unit with both a VHF radio and an autopilot at the same time?

    A. You may interface your GPS unit with up to three external devices at the same time provided the versions of NMEA streamed by the GPS are compatible with the external device. To determine the versions of NMEA output by your GPS unit, refer to the product's owner's manual. This information is usually found near the back of the manual, just before the index.


    Related FAQs:
    1. What interface setting do I use for my GPS when I connect it to a computer, chartplotter, autopilot, differential beacon receiver, or another Garmin GPS?
    2. What does the message "NO RTCM INPUT" mean?
    3. Why am I not receiving fish information from my sounder around obscured places like rises and ravines which are on the bottom of the lake?
    4. Why is placement of transducers so important?
    5. Where is the best place to place my thru-hull depth transducer?
    6. My boat has a large displacement-hull. Where should I place the transducer?
    7. What NMEA version does my GPS unit output?
    8. I have two fishfinder or sounder units. Can I run them both from the same transducer?
    9. Why can't I get a bottom reading when I am running in shallow water?
    10. I have a canvas Bimini top on my boat. Can I install my GPS antenna underneath it?
    11. What does the loop around the data wires on the wiring diagram for my unit mean?
    12. Will the radar beacon antenna installed on my boat interfere with my Garmin GPS antenna?
    13. Can I use Loran TD coordinates on my Garmin GPS?




  4. Q. How can I change the mode of the GPSMAP 196 between land, aviation, and marine?

    A. After turning the GPS unit on, press the Menu button twice. Use the rocker pad to highlight the Setup tab. Then use the rocker pad to scroll to the right to highlight the System tab. Next, scroll down until the field beneath "System Mode" is highlighted. Press Enter once. Highlight the mode you wish to use, and press Enter. You may exit the menus by pressing the Quit button. For a faster method, you can also hold down the Page button for two seconds, and then use the rocker pad to select the correct mode. Pressing Enter once you have the mode higlighted will change the unit to present data for that particular mode of operation.


    Related FAQs:
    1. Does Garmin make an instructional video for my GPS unit?
    2. What interface setting do I use for my GPS when I connect it to a computer, chartplotter, autopilot, differential beacon receiver, or another Garmin GPS?
    3. I can't get my Jeppesen Aviation database update to work with my GPS unit. What can I try?
    4. How often are Jeppesen aviation database updates available?
    5. What areas do the Jeppesen databases for Garmin handheld GPS units cover?
    6. What NMEA version does my GPS unit output?
    7. What kind of mapping is available for the GPSMAP 196?
    8. How do I display the "Panel Page" on the GPSMAP 196?




  5. Q. How do I display the "Panel Page" on the GPSMAP 196?

    A. On the HSI page (one page after the Map page), press the Menu button once. Highlight "Setup Page Layout", and press Enter. Highlight "Panel", and press Enter.


    Related FAQs:
    1. What is TracBack?
    2. Should I have received a Warranty Registration card with my Garmin unit?
    3. Why can't I enter some of my Airport identifiers in my aviation GPS unit?
    4. I can't get my Jeppesen Aviation database update to work with my GPS unit. What can I try?
    5. What kind of mapping is available for the GPSMAP 196?
    6. How can I change the mode of the GPSMAP 196 between land, aviation, and marine?




  6. Q. Will my GPS unit float?

    A. Currently, Garmin produces eight GPS models that have the ability to float in water. Those units are:

    Garmin recommends the use of lanyards to help ensure that handheld units are not lost overboard in a marine environment.


    Related FAQs:

    1. Do you have a retail store at your factory in the U.S. where I can buy accessories or see your products demonstrated?
    2. Can I order directly from Garmin?
    3. Can I upgrade my older Garmin unit to a newer Garmin unit?
    4. Does Garmin take trade-ins?
    5. Does Garmin make an instructional video for my GPS unit?
    6. How do I arrange to get my Garmin unit repaired in the U.S.?
    7. How do I arrange to get my Garmin unit repaired in Europe?
    8. Can I "real-time track" using any MapSource product and my GPS 72/76 series unit?
    9. Is my GPS 72/76 series unit WAAS enabled?




  7. Q. What NMEA version does my GPS unit output?

    A. All Garmin GPS manuals will list the NMEA version (some units output more than one version) for that particular unit. Generally, this information is found in the back of the manual, just before the index.


    Related FAQs:
    1. Can I interface my GPS unit with both a VHF radio and an autopilot at the same time?
    2. How can I change the mode of the GPSMAP 196 between land, aviation, and marine?




  8. Q. What is a Waypoint?

    A. Waypoints are locations or landmarks worth recording and storing in your GPS. These are locations you may later want to return to. They may be check points on a route or significant ground features. (e.g., camp, the truck, a fork in a trail, or a favorite fishing spot).

    Waypoints may be defined and stored in the unit manually, by taking coordinates for the waypoint from a map or other reference. This can be done before ever leaving home. Or more usually, waypoints may be entered directly by taking a reading with the unit at the location itself, giving it a name, and then saving the point.

    Waypoints may also be put into the unit by referencing another waypoint already stored, giving the reference waypoint, and entering the distance and compass bearing to the new waypoint.


    Related FAQs:

    1. What are the differences between the eTrex units?
    2. How is the Thumb Stick (five-position cursor switch) used on the eTrex Venture, Legend, or Vista?
    3. Why are there waypoints in my waypoint list beginning with the letter "T"?
    4. Can I use Loran TD coordinates on my Garmin GPS?




  9. Q. Where can I find a complete list of Garmin's WAAS-enabled GPS units?

    A. For a complete list of Garmin's WAAS-enabled GPS units?and to read more about WAAS?please visit our What is WAAS? web page.

  10. Q. Does Garmin make an instructional video for my GPS unit?

    A. Garmin offers instructional videos for the Geko series, eMap, eTrex series, GPS III Plus, GPS V, GPS 76/GPSMAP 76, Rino series, StreetPilot III, GPSMAP 176/182/232, fishfinders, GPSMAP 196, and GPSMAP 295. These videos are available from your Garmin dealer or online from our Online Store.

    There are some companies that produce videos for our other products. Check with your Garmin to find a video for your particular Garmin model. Consult our Dealer Locator for the Garmin dealer nearest you.


    Related FAQs:

    1. Do I have to subscribe to a service to use my GPS?
    2. Do you have a retail store at your factory in the U.S. where I can buy accessories or see your products demonstrated?
    3. Can I order directly from Garmin?
    4. Can I upgrade my older Garmin unit to a newer Garmin unit?
    5. Does Garmin take trade-ins?
    6. How do I arrange to get my Garmin unit repaired in the U.S.?
    7. How do I update the database in my Garmin aviation panel-mount GPS unit?
    8. What are the differences between the eTrex units?
    9. How is the Thumb Stick (five-position cursor switch) used on the eTrex Venture, Legend, or Vista?
    10. What are the differences between the GPS V and the StreetPilot III?
    11. What sort of detail does the basemap for the StreetPilot III or the GPS V include?
    12. Can I "real-time track" on a PC using a GPS 12 series unit?
    13. What are the differences between the GPS 72 and the GPS 76?
    14. Will my GPS unit float?
    15. Can I "real-time track" using any MapSource product and my GPS 72/76 series unit?
    16. Do the GPS 72/76 series units have mapping memory?
    17. Do I need to purchase a datacard for my GPS 72/76 series or eTrex unit?
    18. Why can't I get a speed reading from the speed sensor attached to my fishfinder or sounder?
    19. Can I use Loran TD coordinates on my Garmin GPS?
    20. What kind of mapping is available for the GPSMAP 196?
    21. How can I change the mode of the GPSMAP 196 between land, aviation, and marine?




Top
TOP
Copyright 1996- Garmin Ltd. or its subsidiaries
Privacy Statement/Terms of Use